How to order Ergo Pergola
Dimension
*When ordering a folding canopy, customers need to provide four key dimensions: [front height], [rear height], [width], [protruding length], and [clear height]
*"Front height" refers to the distance from the base to the top of the rail, and "Rear height" refers to the distance from the base to the top; [Clear height] is the height of the front column
*[Extension Length] is the plane distance from the wall code to the front column, not the track length.
Extension Length
*The protruding length of the ceiling without column support is the distance from the wall yard to the front column. If there is no front column, it is also designed to be at the position of the theoretical column. It is also important to note that the track will expand by 4-5 cm;
*The extended length ≠ the complete length of the canopy. The actual length of the canopy is 4-5cm longer than the extended length. Attention should be paid when measuring the installation position dimensions!
The drape length of the fabric when retracting
When the pergola is retracted, the curtain will naturally sag by 19-22cm in length. During installation, it is important to reserve a position for the curtain to sag under the crossbar.
The installation height can be appropriately raised to prevent the curtain from blocking the opening of the door after the canopy is retracted,
If there are no doors or windows below the canopy, they can be ignored.
Wall code size and calculation
When installing a wall support ceiling, it is necessary to measure, locate, and calculate the location of the wall code.
Minimum mounting position
Due to the fact that the gutter of the canopy is about 9cm wider than the total width of the canopy, it is important to note that when measuring the installation position dimensions, at least 5cm of space should be reserved on both sides when ordering and reporting the width of the canopy.
For example, the width of the installation location is 3000mm, and the ceiling width reported by the customer when ordering the ceiling should be ≤ 2910mm, or the dimensions noted are the installation location dimensions, not the ceiling dimensions.
